SendaFit Matte Starry Rugged MagSafe Case for iPhone 18 Pro (Fits iPhone 17 Pro)

Description

SendaFit Matte Starry Rugged MagSafe Case for iPhone 18 Pro (Fits iPhone 17 Pro) — a sealed glitter field over a reinforced dual-layer body, with the magnet ring inside the back. Eight finishes, sold as the case alone.

Built for a smaller body without making it bulkier

The Pro is the handset people use one-handed. That puts a different constraint on the shell than the Pro Max does: add two millimetres of rubber and the phone stops sitting comfortably in a palm, so the wall has to earn its protection without growing. This build holds the profile flat through the middle of the back and puts the material where it actually absorbs a fall — the four corners and the strip above the screen edge — rather than wrapping the whole rim in the same thickness.

That is a manufacturing decision, not a marketing one. A uniform wall is cheaper to mould and it is what most factories ship, because it hides tooling tolerance. Stepping the wall costs a second operation and a tighter tolerance on the mould, and it is the difference between a case that a customer keeps on the phone and one they take off after a week because it feels like a brick.

The same cut fits the 17 Pro

Apple held the body dimensions between the iPhone 18 Pro and the iPhone 17 Pro, so one tool covers both. Cutouts and camera openings are re-cut between the years; the shell, the frosted starry surface, the magnet pocket and the colour card are identical. Practically, that means one stock code covers the handset shipping now and the one that replaces it — you are not writing off a pallet when the model number moves.

It also means the carton labelling has to change, not the product. If you stock both years at once, label by cut. The colours are the same on both, and a mixed pallet is how the wrong cut ends up in the wrong shop.

Why a smaller phone leans harder on the magnet

The Pro carries a smaller battery than the Pro Max, so in real use it goes on a charger more often — sometimes twice a day for a heavy user. Every one of those cycles is a snap-on and a pull-off. A weak ring does not fail dramatically; it lets the charger sit a few millimetres off centre, charging gets slower, and the phone gets warmer. By the time a customer notices, they blame the case, not the magnet grade.

This ring is an N52 array moulded into a pocket in the rear panel rather than glued on the surface, positioned to the Pro coil centre. Because the Pro and the Pro Max do not share a coil centre, a case cut for the larger body will hold a mount off-position on the smaller one — a fault that looks fine on a shelf and only surfaces later as a complaint.

Getting it off without cracking the back

On a phone this size the temptation is to hook a thumb under one corner and peel. Do not. The same wall that holds firmly enough to survive a drop will resist a side peel, and the back panel is glass. Start at the bottom edge, lift until the corner clears, then work up one side. Worth a line on the sell sheet if your customers field fit complaints — most “too tight” returns are really removal technique.

Carton maths on the smaller body

The Pro case packs tighter than the Pro Max, so a carton carries more pieces and the per-unit freight is slightly lower at the same unit price. When you compare quotes across suppliers, ask for carton quantity and carton dimensions alongside the unit price — on a sea shipment the difference between a tight-packed and a loose-packed carton is real money, and it never shows up on the price list.

Sparkle under the surface, not on it

Rather than being dusted on top, the sparkle is sealed below the coating, so a thumb rides over a level surface and the effect reads as something inside the material. Nothing catches on the back and the finish keeps its sheen. On a lit shelf that is what separates it from a handset sitting bare.

A genuinely tough body underneath

Two layers of contrasting hardness are bonded into a single body, and the walls stand proud of the glass at the display and again at the lens. The ring sits inside the rear panel, so nothing is added to the closed profile. Frosted Clear and Matte Black hold the ends of the card, with the coloured names filling the middle.

Colours and stock code

Dark Green, Royal Blue, Cherry Red, Orange, Light Purple, Frosted Clear, Matte Black, Sierra Blue — eight finishes on this SKU, and the starry card is kept apart from the plain rugged one. Stock code IP-IP18P-031. MOQ 50 pcs per style and colour, mixed freely inside one order.

Where this sits in the iPhone 18 Pro range

Starry Rugged is the one, and Rugged Dual-Layer MagSafe is the plain rugged magnetic body underneath the decoration.

Pricing opens with 2% off at 300 pcs and climbs to 15% off at 10,000+ pcs. Settlement is handled by T/T bank transfer. Goods move DAP door-to-door to Australia, New Zealand, the UK, the UAE, Saudi Arabia, Oman, Jordan, Kuwait, Qatar, the United States and Canada, with DDP or FCA-FOB available whenever requested. Allow 3–5 weeks from the confirmed payment, and a 1–5 pc sample can be ordered from this page.

Every model in the Matte Starry Rugged MagSafe Case

One tooling set covers 2 handsets — cutouts and camera openings change, the shell, the finish and the colour card do not. Prices below are the 50–299 pc tier; the same SKU takes the same volume break whichever model you pick.

The same iPhone 18 Pro (Fits iPhone 17 Pro), in other builds

Right fit, wrong finish? These carry the same cutouts for the iPhone 18 Pro (Fits iPhone 17 Pro) across 29 different builds.

Why N52 magnets matter

This case uses N52 neodymium magnets — the higher magnetic grade. Most mass-market magnetic cases use N35–N42. The difference shows up in the real world: MagSafe chargers snap on securely, magnetic mounts hold firm, and accessories do not slip. If you are selling magnetic cases, this is the detail your customers notice after a week of use.